print Print

Envoy Plus® - Nufarm US


Link to Brochure
Link to MSDS and Product Label





Consistent Grass Control with Excellent Plant Safety.



Envoy Plus® delivers consistent post-emergent control of troublesome annual and perennial grasses. Plus, it has an excellent plant safety profile. Envoy Plus can be applied over-the-top to garden flowers and foliage plants as well as around ornamental trees to control grasses at heights up to 24 inches.


SAFE AND EFFECTIVE GRASS CONTROL
  • Superior formulation maximizes performance
  • Post-emergent control
  • Excellent plant safety: apply over-the-top

APPLICATION RECOMMENDATIONS
TIMING OF APPLICATION

Apply Envoy Plus to actively growing grasses. Applications made to grass plants stressed by insufficient moisture or cold temperatures, or to grass plants exceeding recommended growth stages may result in unsatisfactory control. Do not apply under these conditions.

In arid regions where irrigation is used to supplement limited rainfall, Envoy Plus should be applied as soon as possible after irrigation (within 7 days). In arid regions, a second application of Envoy Plus will generally provide more effective control of perennial grass weeds than a single application. Make second application to actively growing grass 2 to 3 weeks after emergence of new growth. Cultivation of treated grasses 7 days prior to or within 7 days after application of Envoy Plus may reduce weed control.

GROUND APPLICATION

Use of sufficient spray volumes and pressure is essential to ensure complete coverage. Use a minimum of 5 gals and a maximum of 40 gals of spray solution per acre. Under the following conditions a minimum of 10 gals per acre is required: broadleaf herbicide tank mixes, perennial grasses, volunteer corn, drought or stress conditions, heavy grass pressure or when grasses are at or near maximum height. Failure to use a minimum of 10 gals per acre under these conditions can result in poor coverage and reduced grass control requiring repeat applications. Spray pressures should reflect a minimum of 30 psi and a maximum of 60 psi at the nozzle. Do not use flood nozzles.

SPOT TREATMENT

When using hand sprayers or high volume sprayers utilizing hand guns, mix 1/3% to 2/3% (0.44 oz to 0.85 oz per gal) Envoy Plus and treat to wet vegetation, while not allowing runoff of spray solution. For uses requiring crop oil concentrate, include crop oil concentrate at 1% (1.3 oz per gal) by volume. For uses requiring non-ionic surfactant, include non-ionic surfactant at 1/4% (0.33 oz per gal) by volume.


PRECAUTIONS AND RESTRICTIONS
Do not apply if rain is expected within 1 hour of application as control may be unsatisfactory.

Do not apply a post-emergence broadleaf herbicide within one day following application of Envoy Plus or reduced grass control may result.

Do not apply under conditions of stress.


See label for complete application rates and recommendations.
EPA REG. NO.
59639-132

ACTIVE INGR.
clethodim (12.6%)

FORMULATION
liquid

CHEM. FAMILY
cyclohexanedione

GROUP NUMBER
1

SIGNAL WORD
caution

RESTRICTED
no

PACKAGE SIZE
4 x 1 gal


KEY USES
Conifer trees
Garden flowers and plants
Groundcovers
Ornamental trees and shrubs


KEY WEEDS CONTROLLED
(See product label for complete list)
Barnyardgrass
Bermudagrass
Broadleaf signalgrass
Brome
Canarygrass
Crabgrass
Crowfootgrass
Fall panicum
Field sandbur
Foxtail barley
Goosegrass
Itchgrass
Junglerice
Lovegrass (Stinkgrass)
Quackgrass
Rabbitsfootgrass
Red rice
Rhizome johnsongrass
Ryegrass
Seedling johnsongrass
Shattercane
Southwestern cupgrass
Sprangletop
Texas panicum
Wirestem muhly
Witchgrass
Woolly cupgrass